This Blue Scarf Snowman Wall Hanging Crochet Pattern creates a smiling white snowman head under a tall black top hat, decorated with white snowflakes, a light blue band, and a blue poinsettia with green leaves. A blue-and-white striped scarf finishes the lower edge.
This is a head-only wall decoration with a slightly flattened back, a hollow crocheted top hat, and a natural cord hanger. Keep the scarf tail and flower on the right when looking at the face.

Pattern Information
- Skill level: intermediate amigurumi, flat appliques, and assembly. US crochet terms.
- Estimated height: 25–32 cm including the long scarf tail, excluding the hanger. Yarn and tension change proportions.
- Colors: white, black, light blue, olive green, orange, and pink.
- Construction: stuffed head, hollow tall hat and brim, striped scarf, six-petal flower, three leaves, and small yarn berries.
- No torso, arms, or legs are used.
This is an image-inspired adaptation. Counts and repeats have been reviewed, but the design has not been physically crocheted or independently tested. Use the written instructions for construction; photos illustrate appearance.
Materials
- Sport cotton in the listed colors: approximately 40 g white and 30–40 g in the main hat/scarf colors, plus small amounts for details.
- 2–2.5 mm hook, polyester stuffing, tapestry needle, scissors, and markers.
- Black embroidery thread, pink yarn, and two sew-on eye beads or black yarn for embroidered eyes.
- Strong sewing thread and pins.
- For the dangling snowman: soft twisted ivory cotton cord, two 12 cm arms and two 18 cm legs plus attachment allowances. For the wall hanging: natural cotton hanging cord, approximately 30 cm.
Abbreviations and Notes
- MR: magic ring; ch: chain; sl st: slip stitch; sc: single crochet; hdc: half double crochet; dc: double crochet.
- inc: 2 sc in one stitch; dec: sc2tog over two stitches.
- BLO: back loop only. Ch 1 at the start of a turned row does not count.
- Numbers in brackets are finished stitch totals. Mark the first stitch in continuous rounds.
- Use long tails for assembly. Keep every hanging attachment short and sewn through several dense stitches.
White Stuffed Head
- R1: 6 sc in MR [6].
- R2: inc six times [12].
- R3: (sc, inc) six times [18].
- R4: (2 sc, inc) six times [24].
- R5: (3 sc, inc) six times [30].
- R6: (4 sc, inc) six times [36].
- R7: (5 sc, inc) six times [42].
- R8–R13: 42 sc per round [42].
- R14: (5 sc, dec) six times [36].
- R15: (4 sc, dec) six times [30].
- R16: (3 sc, dec) six times [24].
- R17: (2 sc, dec) six times [18].
- R18: (sc, dec) six times [12].
- R19: dec six times [6].
Work continuous rounds, marking the first stitch. Begin adding polyester stuffing after R13 and add small tufts as the opening narrows. Keep the front smooth and gently flatten the back for hanging. After R19, draw the yarn through the six remaining front loops, close, and bury the tail. Do not add a torso.
Carrot Nose and Smiling Face
With orange, R1: 4 sc in MR [4]. R2: (sc, inc) twice [6]. R3: (2 sc, inc) twice [8]. R4: 8 sc. Fasten off with a long tail. Add a tiny pinch of stuffing, flatten the open base, and sew it centrally on the face around head R10–R11, with the MR end pointing outward.
Sew two black eye beads approximately 8–10 mm wide above the nose, or embroider black eyes. Space them evenly on the actual stuffed head. Add a black U-shaped smile below the nose and two short curved eyebrows. Embroider pink cheek patches outside and below the eyes. Secure all thread ends inside the stitches and bury knots at the back. Embroidered eyes are a bead-free option.
Tall Black Top Hat
- With black, R1: 6 sc in MR [6].
- R2–R8: increase six stitches each round, working (n sc, inc) six times as n rises from 0 to 6 [12, 18, 24, 30, 36, 42, 48].
- R9: 48 sc in BLO to turn down the crown edge.
- R10–R27: 48 sc per round for the tall side wall.
- R28: (7 sc, inc) six times [54].
- R29: (8 sc, inc) six times [60].
- R30: (9 sc, inc) six times [66].
- R31: sl st loosely in each of the 66 stitches.
Fasten off and leave the lower opening hollow. The final increase rounds make the projecting brim. Shape the top disc flat, keep the walls tall, and fit the opening over the upper head. Sew the inner brim/head contact in several places; do not fill the whole hat with stuffing. Keep its height visible above the face.
Light Blue Hat Band
With light blue, ch 49. Row 1: sc in each chain from the second chain [48]. Rows 2–4: ch 1, turn, 48 sc. Join the short ends and fit the band around the lower hat wall, just above the brim. Add or remove foundation positions if your actual hat circumference differs. Sew both long edges with small blue stitches.
Embroider white snowflakes and small white dots over the black hat. Use three crossing straight stitches for each snowflake and add tiny branches. Keep the inside floats short and anchor them behind the blue band or inside the hat wall.
Blue-and-White Striped Scarf
With light blue, ch 11. Row 1: sc across from the second chain [10]. Rows 2–60: ch 1, turn, 10 sc in BLO. Change color after every four rows, alternating four blue and four white rows. There are fifteen four-row stripes, starting and ending in blue. Weave color-change tails along the back edge.
Wrap the scarf under the head, cover the lower seam area, and overlap at the front right. Leave a long tail on the right, as in the reference, and a shorter end behind it. Fit the length before sewing the overlap and adding hidden tacks around the lower head.
Add short blue-and-white fringe to both ends. Secure each folded strand through an edge stitch, stitch its knot down, and trim evenly. Keep the long tail broad and flat so the alternating stripes remain visible.
Six Blue Flower Petals and Three Green Leaves
For each petal, ch 7 with blue. Starting in the second chain, work sc, hdc, dc, dc, hdc in the first five positions. In the last chain work (sc, ch 2, sc). Along the underside work hdc, dc, dc, hdc, sc. Join to the first sc and fasten off [12 stitches and one ch-2 tip]. Make six blue petals.
Make three matching pieces in olive green for leaves. Arrange the six blue petal bases in a flower, sew their bases together, then place the green leaves behind with their points projecting. Keep the tips free. Sew the whole flower at the right side of the blue hat band, spreading the attachment across several dense hat stitches.
For the white flower center, make 6 sc in MR, join, and fasten off. Sew it over the petal bases and embroider several small white knots over it for a pearl-like cluster. No loose metal or plastic beads are required.
Small Blue Berries and White Sprays
Make three blue berries: R1, 6 sc in MR; R2, 6 sc; R3, dec three times [3]. Fasten off, close the remaining loops, and leave unstuffed. Sew the three berries beside the flower, close to the hat band.
For each of two white sprays, make a ch-10 stem and sl st back from the second chain [9 sl st]. Add three short ch-4 branches, each slip-stitched back from the second chain [3 sl st]. Sew the branch bases to the stem. Make three tiny white berries per spray using the same 6 / 6 / 3 rounds as the blue berries, and sew one to each branch tip.
Place the sprays behind the flower and leaves. Tack every stem and branch to the hat so nothing hangs as a long loose strand. Keep the blue petals and green leaf tips visible.
Natural Cord Hanger and Final Assembly
Fold approximately 30 cm of soft natural cotton cord into a loop. Anchor its ends to two separate dense areas on the upper back of the hat, folding the ends back and sewing them through several stitches. Reinforce the connection between hat and head so the hanger supports the whole ornament.
Check that the tall hat stays upright, the blue flower sits on the right, and the scarf tail hangs straight below the head. Add hidden tacks at any moving seam. The head-only silhouette has no arms, legs, or torso. Gently flatten the back to sit against a door or wall.
Reading the Two Whole-Ornament Charts
Each image shows the entire finished silhouette above its matching product photo. The colored stitch symbols and component labels identify the head, hat, scarf, and accessories at their assembly positions. Dense repeated fabric is shown as a symbol schematic; exact row and round counts are given in the written instructions. Dashed marks show sewn joins, cord paths show textile cords, and snowflakes show embroidery. This is an assembly chart, not a claim that all separate pieces form one continuous crochet pattern.
Finishing, Care, and Tips
Check the head stuffing before closing: small tufts keep the face smooth. Pin every accessory before sewing and compare the front with the reference. Keep scarf folds relaxed rather than tightening them around the head. Embroider the face before the last accessory seams so you can hide the thread ends.
Spot-clean gently, reshape, and dry completely. Avoid soaking the pompom, fringes, or twisted cord unnecessarily. Store the ornament in a shallow box so the hat and flower or dangling accessories are not crushed. These are decorative hangings with cords and attached parts, not tested children’s toys; display them away from young children and pets.
More Free Christmas Crochet Patterns
Save This Pattern
Save this festive snowman for your handmade winter decorations. Happy crocheting from Lovely Amigurumi!
Tutorial, Two Whole-Ornament Charts, and Pinterest Gallery
The six 1000 × 1500 images are grouped at the end: one photo tutorial, two whole-ornament chart-above-photo guides, and three Pinterest images.









