This Lavender Angel Ornament Crochet Pattern combines a little ivory head, peaceful embroidered eyes, an airy lilac dress, and two delicate fan-shaped wings. A lavender halo and hanging loop finish the angel for your Christmas tree, a gift package, or a handmade holiday display.
The design follows the reference’s gentle lavender-and-ivory palette. Only the head is stuffed; the lace wings and three-tier scalloped dress remain flat and light.

Lavender Angel Ornament Crochet Pattern: Project Details
- Skill level: intermediate, or a confident beginner comfortable with small amigurumi, turning rows, and sewing.
- Terms: US crochet terminology.
- Estimated size: about 12–15 cm tall, excluding the hanging loop. Finished dimensions depend on yarn, hook, and blocking.
- Construction: a stuffed head, a separate five-row lace dress, two separate fan wings, and a halo with a hanging loop.
This is an original image-inspired adaptation. The stitch arithmetic has been reviewed, but the pattern has not been physically crocheted or independently tested. The photographs show the intended appearance; follow the written instructions for exact stitch counts and assembly.
Materials
- Smooth sport-weight cotton: approximately 10 g lavender and 8 g ivory.
- A 2.25–2.5 mm hook, or a size giving firm fabric for the head.
- A small amount of polyester stuffing.
- Black embroidery thread, plus optional pale pink thread for cheeks.
- Tapestry needle, scissors, and a removable stitch marker.
- Blocking mat and rustproof pins for the lace pieces.
Use the same yarn weight for both colors. A smooth cotton makes the lace openings clear and holds the fan edges neatly. If the head stitches show stuffing through the gaps, use a smaller hook for that component. You may use a slightly larger hook for the lace, keeping both wings identical.
Abbreviations and Counting Notes
- MR: magic ring.
- ch: chain.
- sl st: slip stitch.
- sc: single crochet.
- dc: double crochet.
- inc: 2 sc in one stitch.
- dec: single crochet 2 stitches together; use an invisible decrease for the head.
- st / sts: stitch / stitches.
- ch-sp: chain space.
- Shell: 7 dc in the indicated space.
Work the head in continuous rounds without joining, marking the first stitch. For lace rows, turn at the end of every row except the last. A beginning ch 3 counts as one dc; a beginning ch 1 does not count as a stitch. Space chains are listed separately from stitch totals. Embroidery and sewing lines are not crochet stitches.
1. Crochet the Ivory Head
- Round 1: 6 sc in MR. [6]
- Round 2: Inc in each st. [12]
- Round 3: (Sc, inc) 6 times. [18]
- Round 4: (2 sc, inc) 6 times. [24]
- Rounds 5–7: Sc in each st. [24 per round]
- Round 8: (2 sc, dec) 6 times. [18]
- Round 9: (Sc, dec) 6 times. [12]
- Round 10: Dec 6 times. [6]
Before Round 9, embroider two shallow curved closed eyes across the front, around Rounds 5–6, with a gap of about three stitches between them. Add two short eyelash stitches to each eye. Keep knots inside. Add tiny pink embroidered cheek stitches if desired.
Stuff the head lightly after Round 9, adding enough filling to make a round shape without stretching the fabric. Finish Round 10, cut a long tail, and thread it through the front loops of the final six stitches. Pull closed. Keep the closure at the bottom, where the dress will attach.
2. Make the Lavender Fan Dress
Ch 4 and join to the first chain with a sl st, forming a small foundation ring. The dress is worked back and forth in rows, not around the full ring.
- Row 1 — top fan: Ch 3, then 6 dc into the ring. Turn. [7 dc including beginning ch 3]
- Row 2 — two arches: Ch 1, sc in the first dc; ch 3, skip 2 dc, sc in the fourth dc of Row 1; ch 3, skip 2 dc, sc in the top of the beginning ch 3. Turn. [3 sc and two ch-3 spaces]
- Row 3 — two fans: Ch 1, sc in the first sc; work 7 dc in the first ch-3 space, sc in the middle sc; work 7 dc in the second ch-3 space, sc in the final sc. Turn. [14 dc and 3 sc]
- Row 4 — three arches: Ch 1, sc in the first sc; ch 3, skip the first 3 dc of the first shell, sc in its fourth dc; ch 3, skip the remaining 3 dc, the middle sc, and the first 3 dc of the second shell, sc in its fourth dc; ch 3, skip the remaining 3 dc, sc in the final sc. Turn. [4 sc and three ch-3 spaces]
- Row 5 — scalloped hem: Ch 1, sc in the first sc; (7 dc in the next ch-3 space, sc in the next sc) 3 times. [21 dc and 4 sc]
Fasten off, leaving a sewing tail at the neck or adding a fresh length of lavender yarn for assembly. The finished dress has one fan at the top, two fans across the middle, and three fans at the hem. The chain-space rows connect these tiers and keep the fabric open.
Check the fourth dc of each seven-stitch shell before working Row 4. Those two center stitches are the inner anchors for the next set of arches. The middle arch spans the valley between the two shells; do not place an extra sc into that valley.
3. Crochet Two Ivory Lace Wings
Make two identical wings. Each wing is a small semicircular fan with stitched spokes and an open scalloped edge, rather than an empty chain loop.
- Foundation: Ch 4 and join with a sl st to the first chain.
- Row 1: Ch 3, work 6 dc into the foundation ring. Turn. [7 dc]
- Row 2: Ch 3, then (ch 2, dc in the next dc) 6 times. Turn. [7 dc and six ch-2 spaces]
- Row 3: Ch 1, sc in the first dc; (ch 3, sc in the next dc) 6 times, working over each ch-2 space. [7 sc and six ch-3 loops]
Fasten off with a long sewing tail. Spread each fan so its straight foundation side can sit near the neck and its curved edge points outward. Do not stuff the wings. Make sure both have six edge loops and matching tension before blocking.
4. Make the Halo and Hanging Loop
With lavender, ch 18, keeping the chain relaxed. Join with a sl st to the first chain without twisting. Sl st in each of the 18 chains to reinforce the ring. Join to the first reinforcing sl st. Ch 12 and sl st back into that same joining point to create the hanger. Fasten off with a long sewing tail.
The halo should rest across the crown of the head. Lay it in place before sewing: if a yarn substitution makes it too small or large, adjust the starting chain to fit and work one reinforcing sl st in every chain. Keep the hanging loop separate from the halo opening.
5. Block and Assemble Your Angel
- Lightly dampen the dress and wings. Pin the dress into a symmetrical triangle with three rounded hem scallops. Pin the two wings as matching fans. Let them dry completely.
- Center the dress foundation ring beneath the head’s bottom closure. Sew through that ring and several stitches at the base of the head, making multiple small passes.
- Place each wing behind the upper dress, with its foundation point toward the neck. Mirror the two fans. Sew their inner edges to the neck join and upper back of the dress, leaving the outer scallops free.
- Place the halo on the crown, with the hanging-loop join at the back. Stitch the halo to the head at several points. Anchor the hanger’s base securely into the head fabric so the ornament’s weight is supported by the head, not just the halo rim.
- Weave all ends through several stitches on the back. Check the front for symmetry and hang briefly to see whether the dress hangs straight.
Keep the lace flat during sewing. Overlapping the head too far over the dress will hide the first fan, while pulling the wing joins too tightly can curl their edges inward. Use small, loose sewing passes initially, check the placement, then secure them.
Using the Tabletop Crochet Charts
The two chart photographs show the full angel arrangement above the finished piece on a craft table. Read the dress from its narrow top down to the three-shell hem. The wings, stuffed head, and halo are separate components that are sewn together; they are not one continuous flat crochet motif.
Use the written round list for the three-dimensional head, including its increases, stuffing, and decreases. A flat head silhouette in the image is an assembly illustration, not a substitute for those rounds. The written five-row dress and three-row wing instructions take precedence over decorative chart details.
Finishing Tips
- Dress curls: confirm each fan has seven dc and block the chain arches without stretching them excessively.
- Wings differ: compare all seven dc spokes and six edge loops; remake any wing with a missed space.
- Head looks angular: distribute the small amount of stuffing evenly before closing the last round.
- Angel leans: move the hanger’s attachment toward the center back of the crown and check the neck join.
- Storage: support the head and lay the lace flat in tissue paper.
More Free Christmas Crochet Patterns
Save Your Lavender Angel Ornament Crochet Pattern
Make a little lavender angel for a peaceful handmade Christmas. Save this guide for your next holiday project, and enjoy crocheting with Lovely Amigurumi!
Photo Tutorial, Two Tabletop Charts, and Pinterest Images
Keep the photo tutorial and chart references below handy while making your angel, or save a Pinterest image for later.









